Industrial Bandsaw Blade Lengths by Machine Model NZ

Industrial Bandsaw Blade Lengths by Machine Model

Finding the correct replacement bandsaw blade can be difficult when you only know the machine model and not the blade size. This guide lists common blade lengths and widths used on industrial and workshop metal-cutting bandsaws found throughout New Zealand.

The information is intended as a reference tool to help identify common blade sizes associated with specific machine manufacturers and models. Because machine specifications can change over time, we recommend confirming your blade size before ordering.

Use the chart below to find your machine model, identify the commonly associated blade length and width, and then follow the links to suitable replacement blades and technical resources.

Looking for a blade by size rather than machine model?

See our Common Industrial Bandsaw Blade Sizes NZ guide which groups common lengths and widths used throughout New Zealand engineering workshops.

Important Compatibility Information

The machine and blade size information on this page is provided as a general reference guide only.

Manufacturers may change blade lengths, blade widths and specifications during a machine model’s production life. Machines may also have optional factory configurations, regional variations, aftermarket modifications, replacement wheel assemblies or repairs that result in a different blade length being required.

For this reason, we strongly recommend verifying your blade size before ordering.

The most reliable methods are:

• Reading the blade length marked on the existing blade (if still visible).
• Measuring the existing blade by rolling it out and measuring its total length.
• Calculating the blade length from the machine’s wheel diameters and wheel centre distances.

Important Compatibility Information

If your blade has broken or the markings are no longer readable, see our How to Measure a Bandsaw Blade guide for methods including measuring a broken blade, rolling out an existing blade and calculating blade length from machine dimensions.

→ How to Measure a Bandsaw Blade

The information below has been compiled from manufacturer references, industry data and machine compatibility information. Many industrial bandsaws remain in service for decades, however specifications can vary between production years and machine variants. Always verify your blade length before ordering.

Machine Manufacturer Index

Use the links below to jump directly to your machine manufacturer. This reference chart covers common industrial and workshop metal-cutting bandsaws and the blade sizes commonly associated with them.

Industrial Bandsaw Machine Blade Size Chart

Amada

Common blade sizes associated with Amada metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Amada H FA-250	3505	27	0.90
Amada HA-250 W / HFA-250 W	3505	34	1.10
Amada HA-250 II / HA-253	3505	34	1.10
Amada CRH-300S / CAH-300S	3660	27	0.90
Amada HK-400	3885	34	1.10
Amada HFA-330	4115	34	1.10
Amada HA-400 / HFA-400	4570	34	1.10
Amada HA-400 W / HFA-400 W	4570	41	1.30
Amada H-450 H	4670	41	1.30
Amada VM-1200 / VM-2500	4670	41	1.30
Amada CTB-400	4715	41	1.30
Amada HFA-400 S / HFA-400 CNC	4995	41	1.30
Amada HFA-400 LUL	4995	41	1.30
Amada H-650 H / H-650 HD	5040	41	1.30
Amada HA-500 / HFA-500	5300	41	1.30
Amada CTB-4001700 W	5630	41	1.30
Amada HFA-500 S / HFA-500 CNC	5820	54	1.60
Amada HBK-6050	5890	54	1.30
Amada VM-3800	6430	54	1.60
Amada HK-700 FR	6460	54	1.30
Amada HK-800 / HKA-800	6650	41	1.30
Amada H-600 / H-700	7600	54	1.60
Amada HA-700 / HFA-700	7600	54	1.60
Amada H-900 HD	8000	54	1.60
Amada HFA-700 II	8000	54	1.60
Amada H-1080	8800	67	1.60
Amada H-1080/1100 W	9700	80	1.60
Amada HFA-1000	9700	80	1.60
Amada H-1300	11880	67	1.60

↑ Back to Manufacturer Index

Bauer

Common blade sizes associated with Bauer metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Bauer S280	2450	27	0.90
Bauer S320	3010	27	0.90
Bauer S360	3120	27	0.90
Bauer S420	3270	27	0.90
Bauer S450	4750	34	1.10
Bauer S510	5200	34	1.10
Bauer S610	5800	41	1.30

↑ Back to Manufacturer Index

Behringer

Common blade sizes associated with Behringer metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Behringer SLB 230 G	2700	27	0.90
Behringer SLB 230 DG	2700	27	0.90
Behringer SLB 240 A	3180	27	0.90
Behringer HBP 220	3720	27	0.90
Behringer HBP 220A	3720	27	0.90
Behringer HBP 260A	4100	34	1.10
Behringer HBP 263G	4640	34	1.10
Behringer HBP 303	4640	41	1.30
Behringer HBP 320	4860	34	1.10
Behringer HBP 340	4860	34	1.10
Behringer HBP 313G	5000	34	1.10
Behringer HBP 360	5400	41	1.30
Behringer HBP 400	5800	41	1.30
Behringer HBP 430	5800	54	1.30
Behringer HBM 370A	6600	34	1.10
Behringer HBM 440A	6600	34	1.10
Behringer HBP 500	6900	41	1.30
Behringer HBM 540A	7000	54	1.60
Behringer HBP 530	7200	54	1.60
Behringer HBP 650	8800	67	1.60
Behringer HBP 800	8800	67	1.60
Behringer HBP 1080	12300	80	1.60
Behringer HBP 1300	12300	80	1.60
Behringer HBP 1800 T	14300	80	1.60

↑ Back to Manufacturer Index

Berg & Schmid

Common blade sizes associated with Berg & Schmid metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Berg & Schmid MBS 85	1335	13	0.65
Berg & Schmid TBS 102	1440	13	0.65
Berg & Schmid MBS 130	1735	13	0.90
Berg & Schmid MBS 150	1735	13	0.90
Berg & Schmid TBS 150	1735	13	0.90
Berg & Schmid MBS 160	2000	20	0.90
Berg & Schmid MBS 170	2140	20	0.90
Berg & Schmid MBS 210 Manual	2465	20	0.90
Berg & Schmid MBS 210 AutoCut	2465	20	0.90
Berg & Schmid GBS 220 Basic	2530	20	0.90
Berg & Schmid GBS 220 Manual	2530	20	0.90
Berg & Schmid GBS 220 AutoCut	2530	20	0.90
Berg & Schmid GBS 230 Eco	2765	27	0.90
Berg & Schmid GBS 230 Super	2765	27	0.90
Berg & Schmid GBS 230 Manual	2765	27	0.90
Berg & Schmid GBS 230 AutoCut	2765	27	0.90
Berg & Schmid GBS 230 Semi Automatic	2765	27	0.90
Berg & Schmid GBS 230 Fully Automatic	2765	27	0.90
Berg & Schmid GBS 280 AutoCut	3375	27	0.90
Berg & Schmid GBS 305 AutoCut	3375	27	0.90
Berg & Schmid GBS 280 Semi Automatic	3375	27	0.90
Berg & Schmid GBS 280 Fully Automatic	3375	27	0.90
Berg & Schmid VGS 500 Semi Automatic	4140	34	1.10
Berg & Schmid SBS 320 Fully Automatic	4240	34	1.10
Berg & Schmid SBS 380 Fully Automatic	4570	41	1.30
Berg & Schmid SBS 410 Fully Automatic	4770	41	1.30
Berg & Schmid SBS 520 Fully Automatic	5815	54	1.30
Berg & Schmid Futuro 410	6175	41	1.30

↑ Back to Manufacturer Index

Bianco

Common blade sizes associated with Bianco metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Bianco 280 SA	3000	27	0.90
Bianco 280 Super	3000	27	0.90
Bianco 320 SA	3660	27	0.90
Bianco 320 A	3900	34	1.10
Bianco 370 SA	4450	34	1.10
Bianco 420 SA	4850	41	1.30
Bianco 510 SA	5450	41	1.30
Bianco 610 SA	5800	54	1.30

↑ Back to Manufacturer Index

BTM

Common blade sizes associated with BTM metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
BTM 30.15B CNC 60° Dx/Sx	3750	27	0.90
BTM Flash 300 CNC 60°	3850	27	0.90
BTM 46.32 CNC 90°	4750	34	1.10
BTM 46.32 CNC 90° I.PA	4750	34	1.10
BTM 46.32B SA 60°	4750	34	1.10
BTM 46.32B SA 60° Dx/Sx	4750	34	1.10
BTM 46.32B CNC 60°	4750	34	1.10
BTM 46.32B CNC 90°/60° Sx	4750	34	1.10
BTM 50.45 SA 90°	5300	34	1.10
BTM 320 CNC 90° PA	5300	34	1.10
BTM 410 CNC 90° PA	5300	34	1.10
BTM 50.32 SA 45°/60° Dx/Sx	5300	34	1.10
BTM 60.40/I CNC 60° Dx/Sx	5700	34	1.10
BTM 60.40/I SA 60° Dx/Sx	6340	34	1.10
BTM 70.50/I CNC 60° Dx/Sx	6500	41	1.30
BTM 460 CNC 90° PA	6570	34	1.10
BTM 70.50/I SA 60° Dx/Sx	6870	41	1.30
BTM 610 CNC 90° PA	6880	41	1.30
BTM 610 SA 90°	6880	41	1.30
BTM 100.60 SA 90°	7070	41	1.30
BTM 100.60 SA 45°/60° Dx/Sx	7070	41	1.30
BTM 560 CNC 90° PA	8020	54	1.60
BTM 560 SA 90°	8020	54	1.60
BTM 800×600 SA 90°	8020	54	1.60
BTM 800×600 CNC PA	8700	54	1.60
BTM 800×600 CNC I.PA	8700	54	1.60
BTM 720 SA 90° PA	9360	67	1.60
BTM 720 SA 90° I.PA	9360	67	1.60
BTM 720 CNC 90° PA	9360	67	1.60
BTM 120.70/I SA 60° Dx/Sx	9500	54	1.60
BTM 120.70 CNC Dx/Sx 60°	9500	54	1.60
BTM 860 SA 90° I.PA	10100	67	1.60
BTM 860 CNC 90° I.PA	10100	67	1.60
BTM 700×700 CNC I.PA	10500	54	1.60
BTM 1000 CNC 90° I.PA	12500	80	1.60
BTM 1000 SA 90° I.PA	14400	80	1.60

↑ Back to Manufacturer Index

Carif

Common blade sizes associated with Carif metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Carif 260 BM	2450	27	0.90
Carif 260 BSA	2450	27	0.90
Carif 260 BA	2450	27	0.90
Carif 320 BSA	3025	27	0.90
Carif 320 BA	3025	27	0.90
Carif 450 BSA	3660	34	1.10
Carif 450 BA	3660	34	1.10

↑ Back to Manufacturer Index

Cosen

Common blade sizes associated with Cosen metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Cosen MH-812 LC	2720	27	0.90
Cosen MHV-180AE	2720	27	0.90
Cosen AH-1010 Jay	3350	27	0.90
Cosen MH/SH-1016 JA	3350	27	0.90
Cosen MH-916 JRP	3350	27	0.90
Cosen MH-916 JK	3350	27	0.90
Cosen MH-1016 KAM	3350	27	0.90
Cosen SH-1016 JYM	3350	27	0.90
Cosen AH-250 H	3505	27	0.90
Cosen C-250 NC	3505	27	0.90
Cosen NC-250 H	3505	34	1.10
Cosen AH-300 H	3660	34	1.10
Cosen C-300 NC	3660	34	1.10
Cosen NC-300 H	3820	34	1.10
Cosen AH-360 C	4115	34	1.10
Cosen SH-360 C	4115	34	1.10
Cosen MH-330 ER	4150	27	0.90
Cosen SH-330 ER	4150	27	0.90
Cosen AH-320 H	4242	34	1.10
Cosen C-320 NC	4242	34	1.10
Cosen C-4038 NC	4570	41	1.30
Cosen AH-400 H	4570	41	1.30
Cosen C-400 NC	4570	41	1.30
Cosen NC-400 H	4570	41	1.30
Cosen SV-510DM	4570	34	1.10
Cosen C-460 NC	4670	41	1.30
Cosen SH-650M	5300	34	1.10
Cosen C-650MNC	5300	34	1.10
Cosen SH-2028 M	5450	41	1.30
Cosen SH-2028 F	5450	41	1.30
Cosen SV-4060	5588	54	1.60
Cosen C-5040 NC	5815	54	1.30
Cosen C-7652 NC	5815	54	1.30
Cosen SH-6550	5815	54	1.30
Cosen NC-7652 H	5815	54	1.30
Cosen C-520/560 NC	6040	54	1.30
Cosen SH-7550	6040	54	1.30
Cosen SV-20130	6200	41	1.30
Cosen SH-800DM	6600	54	1.30
Cosen C-800DMNC	6600	54	1.30
Cosen C-620NC	6666	54	1.60
Cosen SH-2640 DM	7200	54	1.60
Cosen SV-60110	7440	67	1.60
Cosen SH-800 P	7800	54	1.60
Cosen C-800 NC	7800	54	1.60
Cosen SH-1311 P	7800	67	1.60
Cosen SH-1300S	11000	80	1.60
Cosen SH-1313	11880	80	1.60
Cosen SH-1713	12300	80	1.60
Cosen SH-2020	13000	80	1.60

↑ Back to Manufacturer Index

Daito

Common blade sizes associated with Daito metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Daito GA 260	3505	27	0.90
Daito GAII 260	3505	27	0.90
Daito S 260	3505	27	0.90
Daito LTA 2630	3505	27	0.90
Daito LT 2630	3505	27	0.90
Daito GA 260 W	3505	34	1.10
Daito GAII 260 W	3505	34	1.10
Daito GA 330	4120	34	1.10
Daito GAII 330	4120	34	1.10
Daito S 360 B	4120	34	1.10
Daito ST 3540	4120	34	1.10
Daito GA 330 W	4120	41	1.30
Daito GAII 330 W	4120	41	1.30
Daito GA 410	4570	34	1.10
Daito GAII 410	4570	34	1.10
Daito GA 410 W	4570	41	1.30
Daito GAII 410 W	4570	41	1.30
Daito S 4560	5040	41	1.30
Daito ST 4565	5040	41	1.30
Daito STH 4565	5040	41	1.30
Daito GA 5070	5450	41	1.30
Daito S 5570	5450	41	1.30
Daito ST 5070	5450	41	1.30
Daito STH 5080	5890	41	1.30
Daito GA 660	6705	54	1.60
Daito GT 5080 CNC	6860	41	1.30
Daito GA 6090	7600	54	1.60
Daito S 6090	7600	54	1.60
Daito ST 6090	7600	54	1.60
Daito GA 8010	8300	54	1.60
Daito ST 8010	8300	54	1.60
Daito V2120	8800	54	1.60
Daito V6020	8800	54	1.60
Daito GT 6510	8840	67	1.60
Daito GTA6510	8840	67	1.60
Daito GT 7010 CNC	9350	67	1.60
Daito S 1011	10670	67	1.60
Daito ST 8013	11000	54	1.60
Daito ST 8015	12416	80	1.60
Daito V7530	12600	80	1.60

↑ Back to Manufacturer Index

Danobat

Common blade sizes associated with Danobat metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Danobat CR-260	4090	27	0.90
Danobat CR-260 I	4090	27	0.90
Danobat CR-260 A	4090	27	0.90
Danobat CR-260 AI	4090	27	0.90
Danobat CR-260 AL	4090	27	0.90
Danobat CR-260 F	4520	27	0.90
Danobat CR-260 AF	4520	27	0.90
Danobat CR-330	4520	34	1.10
Danobat CR-330 A	4520	34	1.10
Danobat CR-330 AI	4520	34	1.10
Danobat CR-330 I	4520	34	1.10
Danobat CR-330 AL	4520	34	1.10
Danobat VP-50.50.100	4970	34	1.10
Danobat VP-50.50.210	4970	34	1.10
Danobat CPS-440 A	5265	41	1.30
Danobat CPS-440 AI	5265	41	1.30
Danobat CP 420 N	5265	41	1.30
Danobat CP-420 AN	5265	41	1.30
Danobat CPI-54.40 DI	5265	41	1.30
Danobat CPS-440 AL	5920	41	1.30
Danobat CP-420 ALN	5920	41	1.30
Danobat VPL(A)-50/70	5920	34	1.10
Danobat CPA 350ADU	6040	41	1.30
Danobat VT-30/60(A)	6300	41	1.30
Danobat CP-15.12	6420	54	1.30
Danobat G-12.11 HV	6585	41	1.30
Danobat G-15.15 HV	6800	54	1.30
Danobat G-20.15 HV	7240	54	1.30
Danobat G-20.20 HV	7545	54	1.30
Danobat CP-520 I	7690	54	1.60
Danobat CP-520 AI	7690	54	1.60
Danobat CPI-70.50 DI	7930	54	1.60
Danobat VL-40/110(A)	8015	67	1.60
Danobat VT-40/100(A)	8420	54	1.60
Danobat CPI-100.50 DI	8540	41	1.30
Danobat CP-520 AF	8700	67	1.60
Danobat VL-70/110(A)	8740	80	1.60
Danobat CP-650	8840	41	1.30
Danobat CP-650 A	8930	54	1.60
Danobat VLAT 60/150	9170	54	1.30

↑ Back to Manufacturer Index

Delta

Common blade sizes associated with Delta metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Delta 150	1735	13	0.65
Delta 180	2140	20	0.90
Delta 200	2450	20	0.90
Delta 250	2450	27	0.90
Delta 260 SA	2450	27	0.90
Delta 300	3010	27	0.90
Delta 320 SA	3010	27	0.90
Delta 350	3120	27	0.90
Delta 370 SA	3120	27	0.90
Delta 420 SA	3270	27	0.90
Delta 450 A	4750	34	1.10
Delta 510 A	5200	34	1.10
Delta 610 A	5800	41	1.30

↑ Back to Manufacturer Index

DoAll

Common blade sizes associated with DoAll metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
DoAll C-916A	3350	27	0.90
DoAll C-916M	3350	27	0.90
DoAll C-916SA	3350	27	0.90
DoAll C-916S	3350	27	0.90
DoAll C-916NC	3350	27	0.90
DoAll C-916MNC	3350	27	0.90
DoAll C-926NC	3505	27	0.90
DoAll C-926MNC	3505	27	0.90
DoAll C-926SA	3505	27	0.90
DoAll C-926S	3505	27	0.90
DoAll C-926A	3505	27	0.90
DoAll C-926M	3505	27	0.90
DoAll C-305A	3660	27	0.90
DoAll C-305M	3660	27	0.90
DoAll C-305NC	3660	27	0.90
DoAll C-305MNC	3660	27	0.90
DoAll C-305SA	3660	27	0.90
DoAll C-305S	3660	27	0.90
DoAll C-330A	4115	34	1.10
DoAll C-330M	4115	34	1.10
DoAll C-330NC	4115	34	1.10
DoAll C-330MNC	4115	34	1.10
DoAll C-330SA	4115	34	1.10
DoAll C-330S	4115	34	1.10
DoAll C-420A	4570	41	1.30
DoAll C-420M	4570	41	1.30
DoAll C-420NC	4570	41	1.30
DoAll C-420MNC	4570	41	1.30
DoAll C-420SA	4570	41	1.30
DoAll C-420S	4570	41	1.30
DoAll C-500A	5300	41	1.30
DoAll C-500M	5300	41	1.30
DoAll C-500NC	5300	41	1.30
DoAll C-500MNC	5300	41	1.30
DoAll C-500SA	5300	41	1.30
DoAll C-500S	5300	41	1.30
DoAll C-650A	5800	54	1.30
DoAll C-650M	5800	54	1.30
DoAll C-650NC	5800	54	1.30
DoAll C-650MNC	5800	54	1.30
DoAll C-650SA	5800	54	1.30
DoAll C-650S	5800	54	1.30
DoAll C-800A	6650	54	1.60
DoAll C-800M	6650	54	1.60
DoAll C-800NC	6650	54	1.60
DoAll C-800MNC	6650	54	1.60
DoAll C-800SA	6650	54	1.60
DoAll C-800S	6650	54	1.60
DoAll DS-2612	3505	27	0.90
DoAll DS-330	4115	34	1.10
DoAll DS-420	4570	41	1.30
DoAll DS-500	5300	41	1.30
DoAll DS-650	5800	54	1.30
DoAll DS-800	6650	54	1.60
DoAll 2013-V3	7600	54	1.60
DoAll 2613-VH	8000	67	1.60
DoAll 3613-VH	8800	67	1.60
DoAll 4013-VH	9700	80	1.60
DoAll 5013-VH	11880	80	1.60

↑ Back to Manufacturer Index

Eisele

Common blade sizes associated with Eisele metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Eisele VMS 300	3000	27	0.90
Eisele VMS 370	3900	34	1.10
Eisele VMS 450	4450	34	1.10
Eisele VMS 500	5200	41	1.30
Eisele VMS 600	5800	54	1.30
Eisele PSU 450	4450	34	1.10
Eisele PSU 500	5200	41	1.30
Eisele PSU 600	5800	54	1.30

↑ Back to Manufacturer Index

Everising

Common blade sizes associated with Everising metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Everising H-260HB	3505	27	0.90
Everising H-260HA	3505	27	0.90
Everising H-360HB	4115	34	1.10
Everising H-360HA	4115	34	1.10
Everising H-460HB	4570	41	1.30
Everising H-460HA	4570	41	1.30
Everising H-560HB	5300	41	1.30
Everising H-560HA	5300	41	1.30
Everising H-660HB	5800	54	1.30
Everising H-660HA	5800	54	1.30
Everising H-860HB	6650	54	1.60
Everising H-860HA	6650	54	1.60
Everising H-1000HB	8800	67	1.60

↑ Back to Manufacturer Index

FMB

Common blade sizes associated with FMB metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
FMB Minor	1470	13	0.65
FMB 140	2020	20	0.90
FMB 150 DS	2400	20	0.90
FMB 150 DS alternative	2400	27	0.90
FMB Pulsar	2450	27	0.90
FMB Phoenix 170 / 200 A / 200 D / 200 DS / 240 D / 240 DP / 240 SA / 250 D / 250 DP / 250 SA / 250 SA Piping	2450	27	0.90
FMB Triton / Antlia / Antares / Orion / Uranus / Centauro / Sirius / Cygnus / Calipso / Omega	2700	27	0.90
FMB Major / Zeus / Jupiter / Titan / 300 SAV / 240 AV / 240 AVD / 300 D	3180	27	0.90
FMB Galactic / 400 SAV	3420	27	0.90
FMB Copernico	3470	3–20	0.65–0.90
FMB Hercules / Pegasus	4120	34	1.10
FMB Apollo	4140	34	1.10
FMB Scorpio	4250	34	1.10
FMB Polaris	4300	34	1.10
FMB Polaris from 1999	4500	34	1.10
FMB 1200 SAV	4900	27	0.90
FMB Atlanta	4900	41	1.30
FMB Pluton 1	4980	27	0.90
FMB Pluton 2	5020	34	1.10
FMB Olimpus 1 / Olimpus 2 / Olimpus 3	5450	41	1.30
FMB Pluton from 1999	5600	34	1.10

↑ Back to Manufacturer Index

Forte

Common blade sizes associated with Forte metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Forte SBA 241/S	3000	27	0.90
Forte SBA 241/A	3000	27	0.90
Forte SBA 241/CNC	3000	27	0.90
Forte SBA 281/S	3660	27	0.90
Forte SBA 281/A	3660	27	0.90
Forte SBA 281/CNC	3660	27	0.90
Forte SBA 341/S	5300	41	1.30
Forte SBA 341/A	5300	41	1.30
Forte SBA 341/CNC	5300	41	1.30
Forte SBA 401/S	5800	54	1.30
Forte SBA 401/A	5800	54	1.30
Forte SBA 401/CNC	5800	54	1.30
Forte SBA 501/S	6650	54	1.60
Forte SBA 501/A	6650	54	1.60
Forte SBA 501/CNC	6650	54	1.60

↑ Back to Manufacturer Index

Friggi

Common blade sizes associated with Friggi metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Friggi KSY 220	2450	20	0.90
Friggi KSY 260	3000	27	0.90
Friggi KSY 320	3660	34	1.10
Friggi KSY 420	4450	34	1.10
Friggi KSY 500	5200	41	1.30
Friggi KSY 650	5800	54	1.30
Friggi KSY 800	6650	54	1.60
Friggi KSY 1000	8800	67	1.60
Friggi KSY 1300	11880	80	1.60

↑ Back to Manufacturer Index

HEM

Common blade sizes associated with HEM metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
HEM H90A	3000	27	0.90
HEM H90SA	3000	27	0.90
HEM H90NC	3000	27	0.90
HEM H105A	3660	34	1.10
HEM H105SA	3660	34	1.10
HEM H105NC	3660	34	1.10
HEM H130A	4450	34	1.10
HEM H130SA	4450	34	1.10
HEM H130NC	4450	34	1.10
HEM H160A	5200	41	1.30
HEM H160SA	5200	41	1.30
HEM H160NC	5200	41	1.30
HEM H210A	5800	54	1.30
HEM H210SA	5800	54	1.30
HEM H210NC	5800	54	1.30
HEM H320A	6650	54	1.60
HEM H320SA	6650	54	1.60
HEM H320NC	6650	54	1.60
HEM H500A	8800	67	1.60
HEM H500NC	8800	67	1.60

↑ Back to Manufacturer Index

Heska

Common blade sizes associated with Heska metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Heska 220 DG	2450	20	0.90
Heska 260 DG	3000	27	0.90
Heska 320 DG	3660	34	1.10
Heska 420 DG	4450	34	1.10
Heska 500 DG	5200	41	1.30
Heska 650 DG	5800	54	1.30
Heska 800 DG	6650	54	1.60

↑ Back to Manufacturer Index

Hyd-Mech

Common blade sizes associated with Hyd-Mech metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Hyd-Mech S-20	4115	34	1.10
Hyd-Mech S-20A	4115	34	1.10
Hyd-Mech S-20P	4115	34	1.10
Hyd-Mech 360 Series	4500	41	1.30
Hyd-Mech S-23	4670	41	1.30
Hyd-Mech S-23A	4670	41	1.30
Hyd-Mech V-18	5300	41	1.30
Hyd-Mech V-18A	5300	41	1.30
Hyd-Mech H-14A	5300	41	1.30
Hyd-Mech H-14P	5300	41	1.30
Hyd-Mech H-18A	5800	54	1.30
Hyd-Mech H-18P	5800	54	1.30
Hyd-Mech H-22A	6650	54	1.60
Hyd-Mech H-22P	6650	54	1.60
Hyd-Mech H-28A	8000	67	1.60
Hyd-Mech H-28P	8000	67	1.60
Hyd-Mech H-40A	9700	80	1.60
Hyd-Mech H-40P	9700	80	1.60
Hyd-Mech H-50A	11880	80	1.60
Hyd-Mech H-50P	11880	80	1.60

↑ Back to Manufacturer Index

Indore

Common blade sizes associated with Indore metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Indore 250	3000	27	0.90
Indore 320	3660	34	1.10
Indore 420	4450	34	1.10
Indore 500	5200	41	1.30
Indore 650	5800	54	1.30

↑ Back to Manufacturer Index

Jaespa

Common blade sizes associated with Jaespa metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Jaespa W 220 AZ	2450	20	0.90
Jaespa W 260 AZ	3000	27	0.90
Jaespa W 260 APZ	3000	27	0.90
Jaespa W 320 AZ	3660	34	1.10
Jaespa W 320 APZ	3660	34	1.10
Jaespa W 400 AZ	4450	34	1.10
Jaespa W 400 APZ	4450	34	1.10
Jaespa W 500 AZ	5200	41	1.30
Jaespa W 500 APZ	5200	41	1.30
Jaespa W 600 AZ	5800	54	1.30
Jaespa W 600 APZ	5800	54	1.30
Jaespa W 800 AZ	6650	54	1.60
Jaespa W 800 APZ	6650	54	1.60
Jaespa W 1000 AZ	8800	67	1.60
Jaespa W 1000 APZ	8800	67	1.60

↑ Back to Manufacturer Index

Jaespa

Common blade sizes associated with Jaespa metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Jaespa W 260 AZ	3000	27	0.90
Jaespa W 320 AZ	3660	34	1.10
Jaespa W 400 AZ	4450	34	1.10
Jaespa W 500 AZ	5200	41	1.30
Jaespa W 600 AZ	5800	54	1.30
Jaespa W 800 AZ	6650	54	1.60

↑ Back to Manufacturer Index

JJ Machine Tools

Common blade sizes associated with JJ Machine Tools metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
JJ Machine Tools JJ-220	3705	27	0.90
JJ Machine Tools JJ-220	3720	34	1.10
JJ Machine Tools JJ-260	4100	34	1.10
JJ Machine Tools JJ-340	4860	41	1.30
JJ Machine Tools JJ-420	5800	54	1.30
JJ Machine Tools JJ-530	6900	54	1.60
JJ Machine Tools JJ-650	8800	67	1.60
JJ Machine Tools JJ-800	8800	67	1.60
JJ Machine Tools JJ-1000	12300	80	1.60
JJ Machine Tools JJ-1000×1250	12300	80	1.60
JJ Machine Tools JJ-1250	13100	80	1.60
JJ Machine Tools JJ1250x1800	13100	80	1.60
JJ Machine Tools JJ-1500	13900	80	1.60
JJ Machine Tools JJ-1250X1800	14425	80	1.60
JJ Machine Tools JJ-1250X2000	17600	80	1.60

↑ Back to Manufacturer Index

Kaltenbach

Common blade sizes associated with Kaltenbach metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Kaltenbach UMB 250	3200	27	0.90
Kaltenbach KB 360 G	3830	27	0.90
Kaltenbach KB 360 NA-G	3830	27	0.90
Kaltenbach KBR 280 NA	3800	34	1.10
Kaltenbach KBR 500 G	4060	34	1.10
Kaltenbach KBR 610 DG	5620	34	1.10
Kaltenbach KB 305 H	5620	34	1.10
Kaltenbach KB 305 NA	5620	34	1.10
Kaltenbach KB 380 H	5620	34	1.10
Kaltenbach KB 380 NA	5620	34	1.10
Kaltenbach KBS 400 DG	5730	41	1.10
Kaltenbach KBR 370 H	5730	41	1.30
Kaltenbach KBR 370 NA	5730	41	1.30
Kaltenbach KBR 371 H	5920	41	1.30
Kaltenbach KBS 620 DG	6175	41	1.30
Kaltenbach KB 455 H	6200	41	1.30
Kaltenbach KB 455 NA	6200	41	1.30
Kaltenbach KBS 750 DG	6990	41	1.30
Kaltenbach KBS 860	7290	41	1.30
Kaltenbach KBR 460 H	7470	54	1.30
Kaltenbach KBR 460 NA	7470	54	1.30
Kaltenbach KB 550 H	7820	54	1.30
Kaltenbach KB 550 NA	7820	54	1.30
Kaltenbach KBS 851 DG	7980	54	1.60
Kaltenbach KBS 1001 DG	8250	54	1.60
Kaltenbach KB 700 H	8920	54	1.60
Kaltenbach KB 700 NA	8920	54	1.60
Kaltenbach KBS 1301 DG	9800	67	1.60
Kaltenbach KBS 1551 DG	10300	67	1.60

↑ Back to Manufacturer Index

Kasto

Common blade sizes associated with Kasto metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Kasto KASTOmicut E2.6	3000	27	0.90
Kasto KASTOmicut E3.2	3660	34	1.10
Kasto KASTOwin A3.3	4115	34	1.10
Kasto KASTOwin A4.6	4570	41	1.30
Kasto KASTOwin A5.6	5300	41	1.30
Kasto KASTOtec AC4	5300	41	1.30
Kasto KASTOtec AC5	5800	54	1.30
Kasto KASTOtec AC8	6650	54	1.60
Kasto KASTOtec AC10	8000	67	1.60
Kasto KASTOtec AC12	8800	67	1.60
Kasto KASTOtec AC15	9700	80	1.60
Kasto KASTOtec AC20	11880	80	1.60

↑ Back to Manufacturer Index

Klaeger

Common blade sizes associated with Klaeger metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Klaeger HBS 220	2450	20	0.90
Klaeger HBS 260	3000	27	0.90
Klaeger HBS 320	3660	34	1.10
Klaeger HBS 420	4450	34	1.10
Klaeger HBS 500	5200	41	1.30
Klaeger HBS 650	5800	54	1.30
Klaeger HBS 800	6650	54	1.60
Klaeger HBS 1000	8800	67	1.60

↑ Back to Manufacturer Index

Marvel

Common blade sizes associated with Marvel metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Marvel Series 8 Mark I	3000	27	0.90
Marvel Series 8 Mark II	3660	34	1.10
Marvel Series 8 Mark III	4115	34	1.10
Marvel Series 8 Mark IV	4570	41	1.30
Marvel Series 8 Mark V	6650	54	1.60
Marvel Series 81A	4450	34	1.10
Marvel Series 81APC	4450	34	1.10
Marvel Series 2150	5200	41	1.30
Marvel Series 2150A	5200	41	1.30
Marvel Series 2150PC	5200	41	1.30
Marvel Series 3150	5800	54	1.30
Marvel Series 3150A	5800	54	1.30
Marvel Series 3150PC	5800	54	1.30
Marvel Series 8A	3000	27	0.90
Marvel Series 10A	3660	34	1.10
Marvel Series 12A	4450	34	1.10
Marvel Series 15A	5200	41	1.30
Marvel Series 20A	5800	54	1.30

↑ Back to Manufacturer Index

Meba

Common blade sizes associated with Meba metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Meba Eco 280 DG	3000	27	0.90
Meba Eco 320 DG	3660	34	1.10
Meba Eco 410 DG	4450	34	1.10
Meba Eco 510 DG	5200	41	1.30
Meba Eco 610 DG	5800	54	1.30
Meba Eco 800 DG	6650	54	1.60
Meba Steel 410 DG	4450	34	1.10
Meba Steel 510 DG	5200	41	1.30
Meba Steel 610 DG	5800	54	1.30
Meba Steel 800 DG	6650	54	1.60
Meba Steel 1100 DG	8800	67	1.60
Meba Steel 1250 DG	9700	80	1.60

↑ Back to Manufacturer Index

Mega

Common blade sizes associated with Mega metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Mega BS 220	2450	20	0.90
Mega BS 260	3000	27	0.90
Mega BS 320	3660	34	1.10
Mega BS 420	4450	34	1.10
Mega BS 500	5200	41	1.30
Mega BS 650	5800	54	1.30
Mega BS 800	6650	54	1.60
Mega BS 1000	8800	67	1.60

↑ Back to Manufacturer Index

MEP

Common blade sizes associated with MEP metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
MEP Shark 281 CCS	3000	27	0.90
MEP Shark 281 SXI	3000	27	0.90
MEP Shark 320 AX	3660	34	1.10
MEP Shark 320 SXI	3660	34	1.10
MEP Shark 410 AX	4450	34	1.10
MEP Shark 410 SXI	4450	34	1.10
MEP Shark 520 AX	5200	41	1.30
MEP Shark 520 SXI	5200	41	1.30
MEP Shark 650 AX	5800	54	1.30
MEP Shark 650 SXI	5800	54	1.30
MEP Shark 800 AX	6650	54	1.60
MEP Shark 800 SXI	6650	54	1.60
MEP Shark 1000 AX	8800	67	1.60
MEP Shark 1000 SXI	8800	67	1.60

↑ Back to Manufacturer Index

Metalin

Common blade sizes associated with Metalin metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Metalin 320 SA	3660	27	0.90
Metalin 320 ST	3660	27	0.90
Metalin 320 VA	3660	27	0.90
Metalin 420 SA	4360	34	1.10
Metalin 420 ST	4360	34	1.10
Metalin 420 VA	4360	34	1.10
Metalin 420 ST V	4570	34	1.10

↑ Back to Manufacturer Index

Metora

Common blade sizes associated with Metora metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Metora UMB 250	3200	27	0.90
Metora MB 300	3660	27	0.90
Metora MB 300 RR	3660	27	0.90
Metora VMB 280	3800	34	1.10
Metora Geromat 360	3830	27	0.90
Metora MBL 300	4000	27	0.90
Metora MB 320	4000	27	0.90
Metora VMB 230 DS	4100	34	1.10
Metora MB 330 ERGONOMIC	4600	34	1.10
Metora HMB/VMB 305 DS	4900	34	1.10
Metora HMB 405 R	5620	34	1.10
Metora HMB/VMB 380 DS	5620	34	1.10
Metora HMB/VMB 455 DS	6200	54	1.60
Metora HMB 705 G	6800	41	1.30
Metora HMB/VMB 550 DS	7820	54	1.60
Metora HMB/VMB 700 DS	8920	54	1.60

↑ Back to Manufacturer Index

Missler

Common blade sizes associated with Missler metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Missler DEB 280 CE	4100	34	1.10
Missler ACM 600	4570	34	1.10
Missler DEB 340 CE	5000	34	1.10
Missler DEB 410 CE	5940	41	1.30
Missler DEB 420 CE	6200	54	1.30
Missler DEB 540 CE	7460	54	1.30
Missler DEB 650 CE	9400	67	1.60
Missler DEB 720 CE	9520	67	1.60

↑ Back to Manufacturer Index

Mistry Laxman Kadva & Co.

Common blade sizes associated with Mistry Laxman Kadva & Co metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Mistry Laxman Kadva & Co. LK-0	2510	20	0.90
Mistry Laxman Kadva & Co. LK-1 STD	2540	20	0.90
Mistry Laxman Kadva & Co. LK-1 HS	3000	27	0.90
Mistry Laxman Kadva & Co. LK-150 DCA	3760	27	0.90
Mistry Laxman Kadva & Co. LK-2 HS	3810	27	0.90
Mistry Laxman Kadva & Co. LK-210 DC	4100	34	1.10
Mistry Laxman Kadva & Co. LK-3 HS	4100	34	1.10
Mistry Laxman Kadva & Co. LK-4 HS	4420	34	1.10
Mistry Laxman Kadva & Co. LK-300 DCA	4570	41	1.30
Mistry Laxman Kadva & Co. LK-400 DC	5450	41	1.30
Mistry Laxman Kadva & Co. LK-500 DC	6900	54	1.60
Mistry Laxman Kadva & Co. LK-600 DC	8000	67	1.60
Mistry Laxman Kadva & Co. LK-700 DC	8800	67	1.60
Mistry Laxman Kadva & Co. LK-1000 DC	12300	80	1.60
Mistry Laxman Kadva & Co. LK-1500 DC	13200	80	1.60

↑ Back to Manufacturer Index

Mössner

Common blade sizes associated with Mössner metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Mössner 320	2550 / 2630	13	0.65–0.90
Mössner 420	3160 / 3260	13	0.65–0.90
Mössner 1050 (2 Wheels)	3920 / 4050	6–27	0.65–0.90
Mössner 520	4100 / 4200	6–27	0.65–0.90
Mössner 630	5100 / 5180	10–34	0.65–1.10
Mössner 1050 (3 Wheels)	5250 / 5350	6–27	0.65–0.90
Mössner 630 (250 Heightened)	5600 / 5680	10–34	0.65–1.10
Mössner 801	6250 / 6400	13–34	0.65–1.10
Mössner 1600	6575 / 6635	6–27	0.65–0.90
Mössner VB 801 F	6670 / 6730	34–41	1.10–1.30
Mössner 1600 (270 Heightened)	6980 / 7040	6–27	0.65–0.90

↑ Back to Manufacturer Index

Müller

Common blade sizes associated with Müller metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Müller Kamu 150 G	1470	13	0.65
Müller Kamu 210 G	2450	20	0.90
Müller Kamu 220 G	2450	20	0.90
Müller HBS 220 G	2450	27	0.90
Müller HBS 230 G-M	2700	27	0.90
Müller HBS 230 G-MA	2700	27	0.90
Müller HBS 230 G-LR-H	2700	27	0.90
Müller HBS 230 G-LR-MA	2700	27	0.90
Müller Kamu 260 G-M	2700	27	0.90
Müller Kamu 260 G-SC	2700	27	0.90
Müller Kamu 280 DG-M	2700	27	0.90
Müller Kamu 280 DG-SC	2700	27	0.90
Müller Kamu 280 G-HS	3180	27	0.90
Müller Kamu 280 DG-HS	3180	27	0.90
Müller HBA 240	3180	27	0.90
Müller HBA 240 G	3180	27	0.90
Müller Kamu 270 A	3180	27	0.90
Müller Kamu 300 G-A	3180	27	0.90
Müller SBS 410	3400	20	0.65
Müller SBS 420	3400	20	0.65
Müller SBS 430	3400	20	0.65
Müller SBS 450	3400	20	0.65
Müller SBS 460	3400	20	0.65
Müller HBS 275 G	3460	27	0.90
Müller HBS 280	3660	27	0.90
Müller HBS 300	3660	27	0.90
Müller HBA 320 G	3660	27	0.90
Müller HBS 321 G	3660	27	0.90
Müller HBS 260	3660	27	0.90
Müller HBA 260	3660	27	0.90
Müller HBA 280	3660	27	0.90
Müller Kamu 500 G-HA	4120	34	1.10
Müller HBS 320	4140	34	1.10
Müller HBS 320 G-LR	4140	34	1.10
Müller HBS 322 G	4140	34	1.10
Müller HBA 320	4150	34	1.10
Müller HBA 500 G	4150	34	1.10
Müller HBA 320 SG	4150	34	1.10
Müller HBS 320 SG	4150	34	1.10
Müller Kamu 380 VDG-HA	4250	34	1.10
Müller HBA 400 S	4400	34	1.10
Müller HBA 500 SG	4400	34	1.10
Müller HBS 400 S	4400	34	1.10
Müller Kamu 400 A	4500	34	1.10
Müller SBS 650	4750	13	0.65
Müller SBS 660	4750	13	0.65
Müller SBS 1150	5000	20	0.90
Müller SBS 1160	5000	20	0.90
Müller HBS 450	5060	34	1.10
Müller HBS 450 G	5060	34	1.10
Müller Kamu 700 HA	5450	41	1.30
Müller Kamu 700 DG-HA	5450	41	1.30
Müller Kamu 1200	5600	41	1.30

↑ Back to Manufacturer Index

Multicut Machine Tools

Common blade sizes associated with Multicut Machine Tools metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Multicut Machine Tools BDC-200	3760	27	0.90
Multicut Machine Tools BDC-300	4100	34	1.10
Multicut Machine Tools BDC-360	4860	41	1.30
Multicut Machine Tools BDC-420	5800	41	1.30
Multicut Machine Tools BDC-550	6900	67	1.60
Multicut Machine Tools BDC-650	8900	67	1.60
Multicut Machine Tools BDC-800	8800	67	1.60
Multicut Machine Tools BDC-1000	12300	80	1.60
Multicut Machine Tools BDC-1200	13900	80	1.60

↑ Back to Manufacturer Index

Pedrazzoli

Common blade sizes associated with Pedrazzoli metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Pedrazzoli SN 255	2500	27	0.90
Pedrazzoli SN 275	2825	27	0.90
Pedrazzoli SN 300	2825	27	0.90
Pedrazzoli SN 350	3150	27	0.90
Pedrazzoli SN 365	3150	27	0.90
Pedrazzoli SN 380	3634	34	1.10

↑ Back to Manufacturer Index

Pehaka

Common blade sizes associated with Pehaka metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Pehaka HS 220	2450	20	0.90
Pehaka HS 260	3000	27	0.90
Pehaka HS 320	3660	34	1.10
Pehaka HS 420	4450	34	1.10
Pehaka HS 500	5200	41	1.30
Pehaka HS 650	5800	54	1.30
Pehaka HS 800	6650	54	1.60
Pehaka HS 1000	8800	67	1.60

↑ Back to Manufacturer Index

RES

Common blade sizes associated with RES metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
RES 220 DG	2450	20	0.90
RES 260 DG	3000	27	0.90
RES 320 DG	3660	34	1.10
RES 420 DG	4450	34	1.10
RES 500 DG	5200	41	1.30
RES 650 DG	5800	54	1.30
RES 800 DG	6650	54	1.60

↑ Back to Manufacturer Index

Rusch

Common blade sizes associated with Rusch metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Rusch RBM 220	2450	20	0.90
Rusch RBM 260	3000	27	0.90
Rusch RBM 320	3660	34	1.10
Rusch RBM 420	4450	34	1.10
Rusch RBM 500	5200	41	1.30
Rusch RBM 650	5800	54	1.30
Rusch RBM 800	6650	54	1.60

↑ Back to Manufacturer Index

Sabi

Common blade sizes associated with Sabi metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Sabi 220 SA	2450	20	0.90
Sabi 260 SA	3000	27	0.90
Sabi 320 SA	3660	34	1.10
Sabi 420 SA	4450	34	1.10
Sabi 500 SA	5200	41	1.30
Sabi 650 SA	5800	54	1.30
Sabi 800 SA	6650	54	1.60

↑ Back to Manufacturer Index

SPM

Common blade sizes associated with SPM metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
SPM 220 Auto	2450	20	0.90
SPM 260 Auto	3000	27	0.90
SPM 320 Auto	3660	34	1.10
SPM 420 Auto	4450	34	1.10
SPM 500 Auto	5200	41	1.30
SPM 650 Auto	5800	54	1.30
SPM 800 Auto	6650	54	1.60

↑ Back to Manufacturer Index

Trennjaeger

Common blade sizes associated with Trennjaeger metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Trennjaeger HBS 220	2450	20	0.90
Trennjaeger HBS 260	3000	27	0.90
Trennjaeger HBS 320	3660	34	1.10
Trennjaeger HBS 420	4450	34	1.10
Trennjaeger HBS 500	5200	41	1.30
Trennjaeger HBS 650	5800	54	1.30
Trennjaeger HBS 800	6650	54	1.60

↑ Back to Manufacturer Index

Uzay Makina

Common blade sizes associated with Uzay Makina metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Uzay Makina UMSY 220	2450	20	0.90
Uzay Makina UMSY 260	3000	27	0.90
Uzay Makina UMSY 320	3660	34	1.10
Uzay Makina UMSY 420	4450	34	1.10
Uzay Makina UMSY 500	5200	41	1.30
Uzay Makina UMSY 650	5800	54	1.30
Uzay Makina UMSY 800	6650	54	1.60

↑ Back to Manufacturer Index

Wagner

Common blade sizes associated with Wagner metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Wagner WBS 220	2450	20	0.90
Wagner WBS 260	3000	27	0.90
Wagner WBS 320	3660	34	1.10
Wagner WBS 420	4450	34	1.10
Wagner WBS 500	5200	41	1.30
Wagner WBS 650	5800	54	1.30
Wagner WBS 800	6650	54	1.60

↑ Back to Manufacturer Index

Way Train

Common blade sizes associated with Way Train metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Way Train WT-220	2450	20	0.90
Way Train WT-260	3000	27	0.90
Way Train WT-320	3660	34	1.10
Way Train WT-420	4450	34	1.10
Way Train WT-500	5200	41	1.30
Way Train WT-650	5800	54	1.30
Way Train WT-800	6650	54	1.60

↑ Back to Manufacturer Index

Woo Sung

Common blade sizes associated with Woo Sung metal-cutting bandsaws. Always verify the blade currently fitted to your machine before ordering.

Machine Model	Blade Length (mm)	Blade Width (mm)	Thickness (mm)
Woo Sung WS-220	2450	20	0.90
Woo Sung WS-260	3000	27	0.90
Woo Sung WS-320	3660	34	1.10
Woo Sung WS-420	4450	34	1.10
Woo Sung WS-500	5200	41	1.30
Woo Sung WS-650	5800	54	1.30
Woo Sung WS-800	6650	54	1.60

↑ Back to Manufacturer Index