TCT Woodcutting Blade 35mm x .042 x 1.14tpi 5 chip

Description

35mm x 1.1mm x 1.14tpi TCT MC5
Wood bandsaw blade 35mm (1 1/4″)  x .042 (1.1mm)  x 1.14 tpi  (7/8″ or 22mm Pitch) x 10 deg rake.
Also known as Resaw blade, Portamill blade, Portable blade, Wood-Mizer blade, Woodmizer blade

Five Multiple Chip Tooth Design – Smooth Finish compared to a “Set Blade”

10 Degree Hook

Small tooth profile for less drag

Designed to be run on both Horizontal Wood Mills and Vertical Wood Bandsaws

Wood Only Blade

Used for longer blade life, cutting hard timbers

TCT Woodcutting Bandsaw Blade – MC5 Tooth Pattern

This TCT woodcutting bandsaw blade is designed for demanding timber cutting applications where long service life and cutting stability are required. Tungsten carbide tipped teeth provide excellent wear resistance when cutting abrasive or resin-heavy wood products.

The blade features an MC5 (five-chip) tooth pattern, using three different tooth geometries to form the kerf progressively. The first tooth initiates the cut, while subsequent teeth widen the kerf in controlled stages, reducing peak cutting forces and improving cut stability over long runs.

This staged cutting action helps maintain consistent performance in high-volume cutting environments and reduces stress on individual carbide tips.

Suitable for solid timber, reclaimed wood, and laminated wood products. Correct blade tension, machine alignment, and steady feed rates are essential for optimal performance.